Fort Worth sits in the heart of the hail corridor, and peak season runs April through June — roughly two-thirds of significant hail in Tarrant County falls in those three months, May worst of all. Fort Worth permits its own work rather than sharing Dallas’s process, and Texas licenses no roofers, so local registration is the check available to you. This page lists roofers serving Fort Worth.
What Fort Worth roofers handle
Hail and storm damage, with the insurance process that follows. The dominant work.
Full replacement on asphalt shingle, the standard covering.
Impact-resistant upgrades, which carry a premium discount from Texas insurers.
Historic district work on the older stock south and west of downtown.
Repairs and leak tracing at flashing and valleys.
Decking and ventilation exposed at tear-off.
Licensing in Texas
Texas does not license roofing contractors. The Texas Department of Licensing and Regulation does not regulate the trade, there is no state exam, and there is no state register to check. Anyone can start knocking on doors after a storm.
What exists instead:
- City registration and permits, which vary by municipality and are checkable locally
- RCAT certification, from the Roofing Contractors Association of Texas — voluntary, so its absence proves nothing, but its presence is a real signal
- General liability and workers’ compensation, which you verify yourself, because no state licence stands behind the work
One legal point worth knowing before anyone quotes you. Under Texas Insurance Code chapter 707, reinforced by House Bill 2102 in 2019, a contractor may not waive, rebate or absorb your insurance deductible. You are required to pay it. A roofer offering to “cover your deductible” is proposing insurance fraud — a Class B misdemeanour carrying up to 180 days in jail and a $2,000 fine.
It is also the most reliable way to identify a contractor who will not be around when the roof leaks.
What’s specific to Fort Worth
Hail frequency is the defining fact. The DFW metroplex averages four to six significant hail events a year with a genuinely damaging storm every two or three. Tarrant County is squarely inside that. The 1995 Mayfest storm remains the local benchmark for what a severe event does to a city’s roofs.
Practical consequences:
- Impact-resistant Class 4 shingles pay back here, both in survival and in the insurer discount
- Exposure matters more than age. A six-year-old roof that took two-inch hail is a replacement; a fifteen-year-old roof that missed the storms may not be
Fort Worth permits separately from Dallas. Same metroplex, different city, different process — a contractor who works mainly in Dallas is not automatically set up here. Confirm the permit is pulled in the contractor’s name with the City of Fort Worth.
Historic districts control appearance. Fairmount and the older neighbourhoods south of downtown carry historic protections where material and appearance are governed, and approval comes before the permit. Confirm your address before agreeing a start date.
Storm chasers arrive with the hail. Out-of-state crews follow significant events, subcontract locally and leave before any workmanship warranty means anything. Ask how long the company has had a Fort Worth address, and check it is not a mailbox.
Expansive clay moves the structure. North Texas soils shrink and swell. Roof movement that traces to foundation settlement will not be fixed by re-shingling.
Pricing expectations
Fort Worth figures for 2026, as published by local roofing companies and the City:
- Fort Worth specifically: $9,500–$16,000, against a wider DFW band of $8,500–$25,000. Another Fort Worth-scoped guide gives $8,000–$18,000, or $12,000–$14,000 on a 2,000 sq ft home
- Nearby for comparison: Haltom City $8,000–$12,500, Watauga $8,500–$13,000, North Richland Hills $9,000–$14,000, Keller $11,000–$16,000, Colleyville $13,000–$22,000, Southlake $15,000–$28,000
- Three-tab: $3.50–$4.75 per square foot, or $300–$450 per square in Fort Worth; architectural $4.50–$6.00
- Class 4 impact-resistant: $4.75–$6.25 per square foot, or $600–$900 per square
- Tear-off: $1–$3 per square foot; a second layer adds $1,000–$3,000 in disposal. Rotted decking $70–$150 a sheet, 5–15 sheets typical on a storm job, with structural repairs $1,000–$3,000
- A shingle-only re-roof needs no permit in Fort Worth — but replacing any decking does. See below
Fort Worth exempts shingle-only re-roofs from permitting outright, by ordinance — and this is exactly where it differs from Dallas, which is why the two should not be quoted interchangeably. The City’s Building Administrative Code exempts “roof repairs on Group R-3 and their accessory structures”, defining those to include “the repair and replacement of the material above, but not including, the decking material, lathing boards or sheathing boards.” The City’s own re-roofing FAQ says the same in plain language, and answers the follow-up directly: is a permit required if any decking is replaced? Yes. So Fort Worth draws its line by scope of work, while Dallas draws it by value — exempting re-roofing of single-family or duplex dwellings only where the work does not exceed $500, which in practice means nearly every Dallas replacement is permitted.
That has a consequence worth stating: Fort Worth publishes no re-roofing permit fee because it has no shingle-only re-roofing permit. A search of its 48-page development fee schedule finds no roof-replacement line at all. If decking does come off and a permit is needed, the general application fee of $31.50 and technology fee of $16.87 apply. Be sceptical of any “Fort Worth permit fees run $150 to $500” claim you are quoted — one contractor page publishes exactly that, and the City’s own ordinance contradicts it.
Two local amendments are genuinely Fort Worth text rather than model code. An ice barrier underlayment is not required here under the City’s amendments — which matters when comparing against a northern spec. And crickets are required when re-roofing even if none currently exists, which is a real line item on any house with a wide chimney. The City also added two sections of its own, R908.7 and R908.8, governing maintenance of existing provisions and roofing over an existing roof in a way that creates an attic space. Fort Worth works to Chapter 9 of the 2021 International Residential Code, and grandfathers compliant older work: if the roof met code when it was built, it remains compliant.
These are ranges local roofing companies publish for this metro rather than survey data, so treat them as a bracket to check a quote against, not a price list.
Two contract items: whether any decking is being replaced, since that is the line between no permit and a permit in Fort Worth, and that crickets are included where a chimney needs one, which the City requires on a re-roof even if none exists.
Neighborhoods served
Roofers listed here work across Fort Worth, including Fairmount, TCU-West Cliff, Arlington Heights, Ridglea, Wedgwood, Rivercrest, Alamo Heights, Near Southside, Stockyards and Far North Fort Worth.
Most also serve surrounding communities — Arlington, Keller, Southlake, Benbrook, White Settlement, Haltom City, Saginaw and Burleson.
How this directory helps
Every roofer here is listed with business name, address and phone so you can verify them yourself.
Three questions sort Fort Worth contractors. Ask how long they have had a Fort Worth address, since there is no state licence. Ask who pulls the city permit — Fort Worth is not Dallas. And if anyone offers to cover your deductible, that is a Class B misdemeanour under Texas law.